Overview
Industrial Electrical Journeyman – This position is responsible for performing various job tasks on hazardous and non-hazardous waste sites in the Questa, NM area. Work on hazardous waste sites may involve exposure to lead, PCBs, H2S, arsenic, and other metals, chemicals, and conditions. Tasks involve manual labor in various weather conditions.
Full Time Pay: $28.00 - $30.00 per hour plus overtime per state law, travel pay and per diem per company policy. Company benefits include medical, dental, vision, life, disability, sick pay per state law, 401k. This position will be assigned to a project in Questa, NM. To be considered for future projects, candidates must be open to sustained project-based travel within the US. Project locations will vary depending on the assignment. Candidates can reside anywhere within the US.
Responsibilities
- 40-hour HAZWOPER training required.
- Per diem / living allowance and trips home.
- Subject to a background check & physical/drug screen.
- Must be able to wear PPE when needed.
- Schedule M-F, occasional Saturdays.
- Good long-term employment prospects.
Essential Job Functions
Specific job functions include, but are not limited to:
- Ability to test electrical circuits, fuses, and transformers.
- Inspection of electrical systems to determine whether repairs are needed.
- Use of multi-meter and amp probe and other diagnostic equipment.
- Familiar with 480 volt motors and pumps.
- Ability to troubleshoot motor control circuits.
- Knowledge of AC/DC Theory, Ohm’s law, and Transformation.
- Able to read and comprehend electrical design drawings and schematics.
- Ability to use hand tools and power tools.
- Apprised of revisions to the National Electrical Code (NEC) and New Mexico Electrical building codes.
- Understanding/Use of Lockout Tagout Tryout procedures and documentation.
- Able to bend conduit.
- Control and Monitor Instrumentation, Allen Bradley/Schneider (PLC).
- Medium Voltage Switchgear (4160V) or equivalent.
- VFD (Variable Frequency Drive) basics and understanding.
- 1-Phase and 3-Phase AC motor (Well Pump) operation.
- Outdoor/Remote mobile AC generator setup and operation.
- Generator, battery, inverter, solar, and backup power systems.
Physical and Visual Activities Required
Physical and visual activities that are commonly associated with the performance of the functions of this job include:
- Performing physical activities that may require moving one’s whole body, such as climbing, lifting, carrying, pulling, pushing, reaching, handling, balancing, walking, stooping, especially with materials or tools.
- Using one’s own hands and arms in handling, positioning, installing, and moving materials, or in manipulating things.
- Standing, walking, riding, sitting, fingering, feeling, talking, hearing, acuity-near, hand to eye coordination.
- Match or detect differences between colors, including shades of color and brightness.
- See objects or movement of objects to one’s side when the eyes are focused forward.
- Hear the direction from which a sound originated.
- Detect distance of objects and depth perception.
- Endurance to exert muscle force repeatedly or continuously over time.
- Ability to bend, stretch, twist, or reach with the body, arms, and/or legs.
- Ability to use abdominal and lower back muscles to support part of the body repeatedly over time.
- Ability to quickly make coordinated movements to grasp, manipulate, operate, or assemble objects.
- Coordinate movement of arms, legs, and torso during whole-body activity.
- Understanding written sentences and paragraphs in work-related documents.
- Ability to communicate information and ideas in speaking and writing clearly.
- Ability to synthesize information to form general conclusions and develop logical explanations.
- Frequent face-to-face interaction with others and active listening.
Physical Demands
Physical demands commonly associated with this job include:
- Most work is performed while standing or walking.
- Capability to work under physical stress conditions such as heat and cold during various weather conditions and long workdays.
- Frequent and prolonged use of respiratory equipment (i.e., half-face, full-face, SCBA).
- Wear Level C and D PPE; Level A and B PPE may be required.
- Working on elevations such as scaffolding, bridges, buildings, etc.
- Ability to lift objects weighing 1 to 25 lbs regularly and up to 50 lbs when required.
- Working in loud or noisy environments.
Environmental/Atmospheric Conditions
Environmental and atmospheric conditions include:
- Outside construction site with rugged terrain.
- Dusty and windy atmospheres.
- Confined spaces.
- Contaminated atmospheres (fumes, vapors, lead dust, H2S, etc.).
- Potential airborne exposures to dusts, mists, fumes, and vapors within OSHA PELs or other published exposure limits.
Personal Protective Equipment
Personal protective equipment (PPE) may include hard hat, hearing protection, eye protection, face shield, welders helmet, safety vest, gloves, steel-toe boots, and various respirators; protective coveralls may be required.
Qualifications
- Knowledge: Must have a working knowledge of the electrical craft and the National Electrical Code (NEC).
- Experience: 3-5 years or more of industrial electrical experience.
- Education: HS Diploma or equivalent.
- Licenses/Certifications: HAZWOPER 40-hour training and current refresher. Should have all necessary licenses for the jurisdiction in which the work is to be performed. NCCER Electrical Journeyman level certification is a plus. Valid state issued driver’s license preferred.